Vertical Combination Crusher in Cement Factories
The vertical combination crusher is a new type of fine crushing and rough milling product after optimizing and designing the main technical parameter and combining the crushing technologies domestic and international. The vertical combination crusher is mainly used to crush crude cement materials and grogs in medium –sized factory, providing an ideal fine crushing equipment for the technological innovation of cement factories or setting up the cement production line. The vertical combination crusher is also applicable for crushing iron ore, sandsont, gypsum, blast furnace residue, coal stone, piece coal, and many other ores of medium hardness, characterized by the large crushing ratio, little energy consumption, stable run, simple structure, and convenient maintenance and operation.
Features
The vertical combination crusher is promoted on the basis of the same kind of crusher which adopts technology of home and aboard, optimizes the main technical data. As a new type crusher of fine crushing and coarse milling, it is suitable for medium cement industry. The vertical combination crusher is widely used to improve old cement factory and establish new cement factory, also can be used to crush iron ore, sand rock, clinker, gypsum, block coal and other medium-hard material. The vertical combination crusher has features like: simple structure, large crushing ratio, high capacity, even particles, convenient maintenance, low production cost and so on.
Technical parameters:
Model | Capacity(t/h) | Feed size (mm) | Discharging size(mm) | Motor (km) | Dimention L×W×H(mm) | Weight(t) |
PFL-750 | 15-25 | no more than 100 | no more than 3-5 60-90% | 30 | 2180×1210×1700 | 3.8 |
PFL-750A | 15-25 | no more than 100 | no more than 3 90% | 30 | 2180×1210×1700 | 3.8 |
PFL-1000 | 20-40 | no more than 120 | no more than 3-5 60-90% | 55 | 2600×1530×1940 | 5.8 |
PFL-1000A | 20-40 | no more than 120 | no more than 3 90% | 55 | 2600×1530×1930 | 5.5 |
PFL-1250 | 40-70 | no more than 150 | no more than 3-5 60-90% | 75 | 2970×1850×2042 | 8.2 |
PFL-1250A | 40-70 | no more than 150 | no more than 3 90% | 75 | 2920×1850×1950 | 8.6 |
PFL-1500 | 70-100 | no more than 180 | no more than3-5 60-90% | 95 | 3420×2240×2200 | 13.7 |
PFL-1500A | 70-100 | no more than 180 | no more than 3 90% | 95 | 3310×2240×2250 | 13.7 |
Homepage/ www.xgcrusher.com
E-mail/ lola@xgcrusher.com